What size motor Do you need to pull a skier?

To pull a skier or a tube, you should be looking at at least a 150 HP motor, and more is better.

What size motor Do you need to water ski?

A 70 horsepower engine is usually going to get you enough speed to get up on water skis. Having said that, you’re going to do a lot better with a 90 horsepower motor or better.

What size motor Do you need to pull a tube?

A: Although you could pull tubes with just about any size outboard, to be safe you would need at least a 90hp engine to satisfy the tubers in your family. The ideal engine would be a 115hp or 150hp engine if your family is big into water sports.

Will a 75 hp motor pull a skier?

A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.

IT IS INTERESTING:  How do I keep my knees when skiing?

Is 50 hp enough for skiing?

50 hp is marginal for lightweight skiers. … If you plan on a lot of skiing especially slolom you will need a larger boat.

How much HP do you need to water ski?

Horsepower and Speed

A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. After that, the more HP in your engine, the more adventurous you can get with your water sports.

How much horsepower is needed to pull a skier?

150 HP

How fast do you need to go to pull a tube?

29MPH

Will a 40 hp outboard pull a tube?

Your 40 hp 4 stroke will pull some smaller folks on tubes at about 18 mph, maybe 20 mph. If this is fast enough, go for it. Tubing, in general, especially for bigger folks and higher speeds generally take a bit more power. If you could get the 60 hp motor, you would get considerably better performance.

Can you pull a tube with a 40 HP pontoon?

While a 40 hp engine might be okay to push a pontoon boat around the lake for a leisurely ride, it’s not going to be strong enough to pull most skiers. … This size motor will give you plenty of speed for towing tubes, as well as pulling most skiers and wakeboarders too.

Will a 50 HP pontoon pull a tube?

As a general rule, you can pull a tube behind a pontoon as long as it has enough horsepower relative to the weight it is hauling. … Wakes generated from pontoon boats have less shape or depth than wakes created by ski boats, but the tube will still have potential to “whip” at high speed.

IT IS INTERESTING:  Frequent question: Is slalom skiing harder than wakeboarding?

Can you ski behind a 70 hp motor?

Trim all the way in (down) should plane quickly unless weight distribution or engine issues (height, tune, etc). Properly rigged, unless you have a large boat and are already underpowered skiing shouldn’t be a problem with a engine that size.

Is 60 hp enough for pontoon?

So, unless you are buying a pontoon under 20 feet, buying for use on a small lake, or want a pontoon just for cruising and don’t care so much about resale value, 115hp is your baseline. With that said, a 115hp engine on a pontoon can do a lot.

How much horsepower does a 16 foot boat need?

But you don’t have to put engines that large and expensive on a 16′ to 24′ aluminum fishing boat. Boats in this size range with 115-hp to 150-hp engines typically have their best planing fuel economy in the 23-mph to 28-mph range with these size engines and have a WOT in the high 30s or mid-40 mph range.

How much horsepower does a boat need to pull a wakeboarder?

90HP

Can you ski behind a 90hp boat?

Yes you can ski through it, or tube through it; but one becomes a much better and happier skier if he/she does not have to put up with this constant wake caused rope jerk. DO NOT USE A PYLON ON A TILLER.

By ski