A boat should have a minimum of 70 horsepower to pull a skier. The size, weight and design of the boat will play a big part in how much horsepower you will need.
How much horsepower do you need to pull a skier?
What HP is needed for water skiing?
Horsepower and Speed
A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. After that, the more HP in your engine, the more adventurous you can get with your water sports.
What size motor Do you need to pull a skier?
Will a 75 hp motor pull a skier?
A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.
Is 40 hp enough for tubing?
Your 40 hp 4 stroke will pull some smaller folks on tubes at about 18 mph, maybe 20 mph. If this is fast enough, go for it. Tubing, in general, especially for bigger folks and higher speeds generally take a bit more power. If you could get the 60 hp motor, you would get considerably better performance.
Is 60 hp enough for pontoon?
So, unless you are buying a pontoon under 20 feet, buying for use on a small lake, or want a pontoon just for cruising and don’t care so much about resale value, 115hp is your baseline. With that said, a 115hp engine on a pontoon can do a lot.
Will a 50 HP pontoon pull a tube?
As a general rule, you can pull a tube behind a pontoon as long as it has enough horsepower relative to the weight it is hauling. … Wakes generated from pontoon boats have less shape or depth than wakes created by ski boats, but the tube will still have potential to “whip” at high speed.
Can you ski behind a 70 hp motor?
Trim all the way in (down) should plane quickly unless weight distribution or engine issues (height, tune, etc). Properly rigged, unless you have a large boat and are already underpowered skiing shouldn’t be a problem with a engine that size.
How much horsepower does a 16 foot boat need?
But you don’t have to put engines that large and expensive on a 16′ to 24′ aluminum fishing boat. Boats in this size range with 115-hp to 150-hp engines typically have their best planing fuel economy in the 23-mph to 28-mph range with these size engines and have a WOT in the high 30s or mid-40 mph range.
How big of a motor do you need to pull a tube?
A: Although you could pull tubes with just about any size outboard, to be safe you would need at least a 90hp engine to satisfy the tubers in your family. The ideal engine would be a 115hp or 150hp engine if your family is big into water sports.
How fast do you need to go to pull a tube?
How fast does a 90 HP boat go?
Some 90-hp engines in 18′ aluminum boats with two people aboard will perform almost as well at cruise and have a WOT in the low 40s. 16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
How fast does a 70 HP boat go?
It depends on the weight and style of the boat, but any boat in that range should be able to get up on plane(20ish mph+) A 70 on a 15′ fiberglass boat would probably reach 40mph, maybe 45 tops, on a 19 foot boat I doubt you’d be able to go much above 25.
How big of a lake do you need to water ski?
As a general rule, if you have a big fast boat that you want to drive at top speeds for an extended amount of time, you want more than 1000 acres of water. If you have a normal sized boat for waterskiing/family fun you want to be on a lake that is at least 100 acres.
How fast can a 50 HP pontoon boat go?
The average pontoon boat can run anywhere between 15 to 24 mph when fully loaded, with some tri-toon models topping out at over 50 mph. Keep reading to find out just how fast the different size pontoon boats will go when outfitted with different size engines and if they will go fast enough for your boating needs.