A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.
How much horsepower do you need to pull a skier?
What size motor Do you need to pull a skier?
Can you ski behind a 70 hp motor?
Trim all the way in (down) should plane quickly unless weight distribution or engine issues (height, tune, etc). Properly rigged, unless you have a large boat and are already underpowered skiing shouldn’t be a problem with a engine that size.
Will a 75 HP pontoon pull a tube?
As a general rule, you can pull a tube behind a pontoon as long as it has enough horsepower relative to the weight it is hauling. … Wakes generated from pontoon boats have less shape or depth than wakes created by ski boats, but the tube will still have potential to “whip” at high speed.
How big of a motor do you need to pull a tube?
A: Although you could pull tubes with just about any size outboard, to be safe you would need at least a 90hp engine to satisfy the tubers in your family. The ideal engine would be a 115hp or 150hp engine if your family is big into water sports.
Is 40 hp enough for tubing?
Your 40 hp 4 stroke will pull some smaller folks on tubes at about 18 mph, maybe 20 mph. If this is fast enough, go for it. Tubing, in general, especially for bigger folks and higher speeds generally take a bit more power. If you could get the 60 hp motor, you would get considerably better performance.
Is 60 hp enough for pontoon?
So, unless you are buying a pontoon under 20 feet, buying for use on a small lake, or want a pontoon just for cruising and don’t care so much about resale value, 115hp is your baseline. With that said, a 115hp engine on a pontoon can do a lot.
How much horsepower do you need to pull a wakeboarder?
An experienced wakeboarder could get up and ride behind a small boat w/ a little outboard. But if you’re just learning, you’ll want at least 90HP.
How much horsepower does a pontoon boat need to pull a skier?
But if you plan on using your pontoon to water ski or wakeboard, your engine choice needs to include speed considerations for safety. Twin toons, or pontoon boats with two pontoons, generally provide the best pull with engines between 50 and 90 horsepower. These engines are capable of speeds up to 26 mph.
Is 90 hp enough for tubing?
Horsepower and Speed
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. … And 90 HP might be enough for a 20-foot boat to pull a skier, but you’re going to need more engine to ski behind a 26-foot boat.
How much horsepower does a 16 foot boat need?
But you don’t have to put engines that large and expensive on a 16′ to 24′ aluminum fishing boat. Boats in this size range with 115-hp to 150-hp engines typically have their best planing fuel economy in the 23-mph to 28-mph range with these size engines and have a WOT in the high 30s or mid-40 mph range.
How big of a lake do you need to water ski?
As a general rule, if you have a big fast boat that you want to drive at top speeds for an extended amount of time, you want more than 1000 acres of water. If you have a normal sized boat for waterskiing/family fun you want to be on a lake that is at least 100 acres.
How fast will a 75 hp Mercury go?
Most outboards have a preferred powerband where they run at optimum efficiency and minimal fuel burn. Yep, that 75 hp might be able to push the boat to 32 mph, but that’s with the throttle jammed against the stops.
How fast will a 75 HP pontoon go?
Most commercially available pontoon boats tend to average between 18 and 25 miles per hour, although there are some very fast production boats on the market, plus some modified ones that have recently set world records. But generally speaking, the 18 to 25 miles per hour range is what you will be looking at.29 мая 2018 г.
Will a 90hp pontoon pull a tube?
Most pontoon boats are not ideal for tubing if you want a thrill ride. If your boat has a top speed of 20 miles per hour, then, yes, you will be able to pull the inner tube. … When you scale up to a 90hp pontoon boat, things are going to be much better from a performance and fun perspective when inflatable tubing behind.