A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. After that, the more HP in your engine, the more adventurous you can get with your water sports.
How much horsepower do you need to pull a skier?
How fast do you need to go to water ski?
Barefoot skiing requires speeds of approximately 72 km/h (45 mph; 39 kn). Competition speeds have a wide range: as slow as 22 km/h (14 mph; 12 kn) up to 58 km/h (36 mph; 31 kn) for slalom water skiing, and approaching 190 km/h (120 mph; 100 kn) in water ski racing. The boat must be equipped with a ski rope and handle.
Is 50 hp enough for skiing?
50 hp is marginal for lightweight skiers. … If you plan on a lot of skiing especially slolom you will need a larger boat.
Is 40 hp enough for tubing?
Your 40 hp 4 stroke will pull some smaller folks on tubes at about 18 mph, maybe 20 mph. If this is fast enough, go for it. Tubing, in general, especially for bigger folks and higher speeds generally take a bit more power. If you could get the 60 hp motor, you would get considerably better performance.
Will a 75 hp motor pull a skier?
A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.
Will a 50 HP pontoon pull a tube?
As a general rule, you can pull a tube behind a pontoon as long as it has enough horsepower relative to the weight it is hauling. … Wakes generated from pontoon boats have less shape or depth than wakes created by ski boats, but the tube will still have potential to “whip” at high speed.
Is 40 mph fast for a boat?
It’s not designed to be a rocket. 40mph on the water in plenty fast, but you may be happier with a go-fast type boat, especially if you need to travel long distances.
Is 90 hp enough for tubing?
Horsepower and Speed
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. … And 90 HP might be enough for a 20-foot boat to pull a skier, but you’re going to need more engine to ski behind a 26-foot boat.
How fast do u have to go to barefoot ski?
30 to 45 MPH
How much horsepower does a 16 foot boat need?
But you don’t have to put engines that large and expensive on a 16′ to 24′ aluminum fishing boat. Boats in this size range with 115-hp to 150-hp engines typically have their best planing fuel economy in the 23-mph to 28-mph range with these size engines, and have a WOT in the high 30s or mid-40 mph range.
Can you ski behind a 70 hp motor?
Trim all the way in (down) should plane quickly unless weight distribution or engine issues (height, tune, etc). Properly rigged, unless you have a large boat and are already underpowered skiing shouldn’t be a problem with a engine that size.
How much horsepower does a boat need to pull a wakeboarder?
Can you ski behind a jon boat?
We used to ski behind small jon boats growing up in central Florida. We just tied a rope to one of the handles on the stern. Yeah, the skier could slow the boat and slide it sideways but that just added to the fun.16 мая 2010 г.
How much horsepower does a pontoon need?
115hp has become the starting point for horsepower and can be a very suitable boat for lots of boaters; 150-175hp choice is a great all-around pontoon and can truly be a versatile “do it all” boat; 200+hp is the way to go if you have a need for speed and want the best performance out of your pontoon.
How much horsepower does a pontoon boat need to pull a skier?
But if you plan on using your pontoon to water ski or wakeboard, your engine choice needs to include speed considerations for safety. Twin toons, or pontoon boats with two pontoons, generally provide the best pull with engines between 50 and 90 horsepower. These engines are capable of speeds up to 26 mph.