Frequent question: Can you ski behind a 70 hp motor?

A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better. … And 90 HP might be enough for a 20-foot boat to pull a skier, but you’re going to need more engine to ski behind a 26-foot boat.

Can you ski behind a 75 hp motor?

A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.

How much HP do you need to pull a skier?

To pull a skier or a tube, you should be looking at at least a 150 HP motor, and more is better.

Can you ski behind an outboard motor?

Fish ‘n ski boats are a genre all their own, but truth be told, virtually any outboard powered fishing boat can be turned into a fish ‘n ski. You can quickly expand the use of your boat with one small addition: the TurboSwing.

IT IS INTERESTING:  What do you wear to a dry ski slope?

How fast does a 70 hp motor go?

around 33 mph

Is 90 hp enough for tubing?

Horsepower and Speed

Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. … And 90 HP might be enough for a 20-foot boat to pull a skier, but you’re going to need more engine to ski behind a 26-foot boat.

Is 60 hp enough for pontoon?

So, unless you are buying a pontoon under 20 feet, buying for use on a small lake, or want a pontoon just for cruising and don’t care so much about resale value, 115hp is your baseline. With that said, a 115hp engine on a pontoon can do a lot.

Is 40 hp enough for tubing?

Your 40 hp 4 stroke will pull some smaller folks on tubes at about 18 mph, maybe 20 mph. If this is fast enough, go for it. Tubing, in general, especially for bigger folks and higher speeds generally take a bit more power. If you could get the 60 hp motor, you would get considerably better performance.

Will a 50 HP pontoon pull a tube?

As a general rule, you can pull a tube behind a pontoon as long as it has enough horsepower relative to the weight it is hauling. … Wakes generated from pontoon boats have less shape or depth than wakes created by ski boats, but the tube will still have potential to “whip” at high speed.

How big of a motor do you need to pull a tube?

A: Although you could pull tubes with just about any size outboard, to be safe you would need at least a 90hp engine to satisfy the tubers in your family. The ideal engine would be a 115hp or 150hp engine if your family is big into water sports.

IT IS INTERESTING:  Do skis have a left and right?

Can you ski behind a bowrider?

It turns out you can wakeboard behind almost anything including bowriders, center consoles, and even pontoon boats among others.

How fast should you pull a tube behind a boat?

29MPH

Can you ski behind a cuddy cabin?

There are certainly drawbacks to a cuddy cabin for wakeboarding, but if it’s what you want or already have, you can certainly wakeboard behind it. You can get a pretty nice cuddy cabin boat for the price of a nice wakeboard boat.

How fast is a 90 hp outboard?

Some 90-hp engines in 18′ aluminum boats with two people aboard will perform almost as well at cruise and have a WOT in the low 40s. 16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.

How fast will a 75 hp Mercury go?

Most outboards have a preferred powerband where they run at optimum efficiency and minimal fuel burn. Yep, that 75 hp might be able to push the boat to 32 mph, but that’s with the throttle jammed against the stops.

How much fuel does a 70 hp outboard use?

A general rule of thumb for outboard fuel consumption to 10% of rated horsepower per hour at WOT. So 10% of 70HP is 7 gallons per hour at WOT.

By ski